App | Re-Registration - yband therapy ARYS tracker charger User Manual

Re-registration
In some cases, you may have to re-register your profile (e.g. new smartphone). As you
already have a verified user account, the registration process is slightly different here:
Welcome!
Nice to meet you! To enjoy all that
ARYS™ me has to offer please
register or use your existing
account.
English
Registration
Existing account
1
Existing account 1/4
Back
Enable Bluetooth®
To pair an ARYS™ me | Tracker you need to
enable Bluetooth® on your smartphone.
Bluetooth® Off On
Next
2
Existing account 2/4
Back
Pair your tracker
Press and hold the button on the tracker
for at least 5 seconds until the LED lights
turn blue and starts blinking.
ARYS™ me | Tracker
17000001
Serial no.
ID code –
Remove pairing
Search again
Next
3 / 4 / 5
app
Smartphone and tracker are in close proximity
1. On the Welcome screen, you can start the registration
process by choosing your language and
pressing the «Existing account» button.
2. Enable Bluetooth and press «Next». In order to pair
®
the tracker, press and hold the button on the ARYS
tracker for at least 5 seconds until the LED turns blue
and starts flashing. This activates the pairing mode of
the tracker. The app now automatically searches for
ARYS me trackers.
TM
3. If an ARYS me tracker is found, it will be displayed
TM
above the search area. You can pair the specific tracker
by pressing the «Pair» button. The Status LED of the
tracker flashes blue while in pairing mode.
4. If the pairing was successful, this is indicated on the
screen. After a successful pairing, the tracker vibrates
and the LED turns constantly blue for 4 seconds before
going out.
| re-registration
me
TM
| 21 |