Table of Contents
Advertisement
tracker
|
LEDs
|
10
|
Status LED and its functionality
Bluetooth
:
®
• A slowly flashing blue LED indicates that the tracker has
been detected by the app and can be paired
• If the pairing was successful, the status LED lights up in
blue for 4 seconds
• A fast, flashing blue LED indicates that data is being
exchanged with the app
Battery level:
• During charging, the LED flashes green
• If the battery status is low, this is indicated as follows:
• Below 20 %: the LED flashes two times every 60 seconds
• Below 10 %: the LED flashes four times every 30 seconds
• Below 2 %: the status LED is constantly red
• If the battery reaches 1 %, the tracker vibrates and shuts
down
If flight mode is activated, the LED works according to the
same principle but the LED is purple instead of blue. The
arm activities are counted independently of the status of the
Bluetooth
function.
®
Activity LEDs and their functionality
The activity LEDs indicate the progress made towards the
daily target as follows:
• Progress <25 %: first LED flashes white (starting on the
left side)
• Progress between 25 and 50 %: first LED is lit in white
and the second LED flashes
• Progress between 50 and 75 %: the first two LEDs are lit
in white and the third LED flashes
• Progress between 75 and 99 %: the first three LEDs are
lit in white and the fourth LED flashes
• Progress 100 %: all four LEDs are lit in white and the
tracker vibrates
If snooze mode is activated, the activity LEDs are blue
instead of white.
Advertisement
Table of Contents
