Table of Contents
Advertisement
|
tracker in detail
Tracker LED interface:
• Flashes green every 15 sec. – normal operation
• Flashes purple every 15 sec. – normal operation, in flight
mode
• Flashes green twice every 60 sec. – battery below 20 %
• Flashes green four times every 30 sec. –battery below
10 %
• Flashes red continuously – battery below 2 %
• Flashes blue continuously – tracker and smartphone are
exchanging data
Daily target:
How are the daily targets defined and how can I reach
them?
• The daily target is defined by the system based on the
activities of the last 30 days
• Every arm movement is recorded
Reminder:
The tracker has been programmed with a smart
reminder:
• Your daily target takes place during normal waking hours
(24 hours reduced by the predefined quiet hours). If the
threshold has not been reached for the last 30 minutes,
your tracker makes two short vibrations
• If further 30 minutes pass without reaching the
requested amount of activity, your tracker makes five
long vibrations
• The reminder can be suspended for the defined snooze
time, which is activated by pressing the button on your
tracker
Technical details:
Your tracker monitors the following:
• All arm activities are monitored and counted towards
your daily target. Activities made in parallel to steps that
are counted are not considered as arm activities for the
daily target
• Movements during quiet hours or snooze periods are
counted
|
12
|
|
• Movements during flight mode are also added to your
daily target
• All steps made during the day are counted
Your tracker saves the following:
Arm activities are saved every 60 seconds
• All reminders
• Daily totals
• Start and end point of the snooze period
If the memory of your tracker is full, the oldest entry will
be deleted and the latest one stored.
Communication:
• Your tracker can only be paired to one device running the
ARYS™ me app and/or to a clinical system
• The data transfer is performed via a Bluetooth
tion using a standard AES 128-bit encryption between
the devices
Update:
The software of your tracker can be updated via the ARYS™
me app.
Tracker test initiated via the ARYS™ me app:
• Sensor test
the bar duplicates the movements when
moving the tracker up and down
• Vibration test
the tracker vibrates for one second
• Light test
status LED and activity LEDs light up
consecutively in all available colors
Flight mode:
In some cases, it is necessary to switch off communication
between the tracker and smartphone. To activate and
deactivate flight mode on the tracker, please press and
hold the button for 5 seconds. On the smartphone, you can
switch flight mode on and off as normal.
When in flight mode, the status LED and activity LEDs flash
in different colors.
connec-
®
Advertisement
Table of Contents
