Maintenance With Corda Minifit - oticon sensei BTE312 Instructions For Use Manual

Maintenance with Corda miniFit

Corda miniFit is a thin tube mounted as the hearing aid sound
output. If your hearing aid has a Corda miniFit solution you
must refer to this section to ensure correct main-tenance and
cleaning procedures.
Replacing Corda miniFit
1. Pull the tube out of the hearing aid.
2. Push the tube into the hearing aid.
3. Correct.
1
2
3
48
Cleaning the Corda miniFit (thin tube)
To remove cerumen from the thin tube:
• Remove the the dome or wax filter in the mould before cleaning the thin tube
• Pull the tube out of the hearing aid (1).
• Insert the cleaning tool in the tube all the way through (2+3).
• Remove the tool and push the tube into the hearing aid (4).
1 2 3 4
49