1. Manuals
  2. Brands
  3. AZZA Manuals
  4. Motherboard
  5. PT-5V3T
  6. Operation manual

AZZA PT-5V3T Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PT-5V3T / 5VMT
SYSTEM BOARD
(VER. 1.x)
OPERATION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PT-5V3T and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AZZA PT-5V3T

Summary of Contents for AZZA PT-5V3T

  • Page 1 PT-5V3T / 5VMT SYSTEM BOARD (VER. 1.x) OPERATION MANUAL...

  • Page 2: Table Of Contents

    PT-5V3T/5VMT TABLE OF CONTENTS SYSTEM BOARD TABLE OF CONTENTS Chapter & Section Page 1. INTRODUCTION ....................1-1 1.1 SYSTEM OVERVIEW ................1-1 1.2 SYSTEM BOARD LAYOUT ..............1-2 2. FEATURES......................2-1 2.1 MAINBOARD SPECIFICATIONS ............2-1 2.2 ADVANCED CONFIGURATION POWER INTERFACE (ACPI)..2-4 2.3 POWER OFF THE PC SYSTEM...............
  • Page 3 PT-5V3T/5VMT SYSTEM BOARD TRADEMARDKS All trademarks used in this manual are the property of their respective owners. NOTE The “LOAD SETUP DEFAULTS” function loads the default settings directly from BIOS default table, these default settings are the best-case values that will optimize the system performance and increase the system stability.

  • Page 4: Introduction

    GREEN-PC computer system. The product name will be PT-5V3T when the VP3 chipset is installed onboard. If the MVP3 chipset is populated on the board, the product mane will become PT-5VMT.
  • Page 5 PT-5V3T/5VMT SYSTEM BOARD LAYOUT SYSTEM BOARD 1.2 SYSTEM BOARD LAYOUT Explanation : All connectors, jumpers and components which are marked by a black point on the corner means the pin-1 side of the connector, jumper and component. PS/2 USB 1...

  • Page 6: Features

    (2).CPU CORE voltage : +2.0V DC ~ +3.5V DC. ¨ System Clock 50 / 60 / 66.6 / 75 MHz. (for VT82C597AT (PT-5V3T)). 60 / 66 / 75 / 83 / 90 / 100 MHz. (for VT82C598AT (PT-5VMT)). ¨ Memory DRAM : Three banks, each bank can be single or double sided, 8MB up to 1GB.
  • Page 7 PT-5V3T/5VMT FEATURES SYSTEM BOARD ¨ Expansion Slots AGP Slots: 32-bit x 1 (Supports 1x/2x AGP graphics cards) PCI Slots : 32-bit x 3 (All Master / Slave, PCI 2.1 Compliant). ISA Slots : 16-bit x 3 (None PCI / ISA slot shared).
  • Page 8 PT-5V3T/5VMT FEATURES SYSTEM BOARD ¨ Hardware Monitoring (optional) CPU voltage, CPU temperature, and two fan speed can be monitored by the mainboard. A series of beeping sounds will be alarming when malfunction. ¨ Software compatibility MS-DOS, Windows NT, OS/2, UNIX, NOVELL, MS Windows, CAD/CAM, Memphis (Beta 2.1), ...etc.

  • Page 9: Advanced Configuration Power Interface (Acpi)

    But most people still use fax machine to receive their messages because it is not practical to have the system powered on all day long waiting for the incoming messages. Now the problem can be solved by using the PT-5V3T/PT- 5VMT mainboard. PT-5V3T/PT-5VMT can be triggered by a modem ring-in signal.

  • Page 10: Power Off The Pc System

    EXTERNAL MODEM and have it connected to one of the SERIAL PORTS ( COMA or COM B ). When the system power is off, PT-5V3T/PT-5VMT will continue to detect the serial port status. When it detects the ring-in signal, the system power will be turned on and start to receive the incoming messages automatically.

  • Page 11: Hardware Setup

    Please refer to the following sections for the details: 3.1 UNPACKING The system board package contains the following parts : Ÿ The PT-5V3T / 5VMT system board. Ÿ OPERATION MANUAL. Ÿ Cable set for IDE and I/O device.

  • Page 12: Connectors

    PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD 3.2.1 CONNECTORS A connector is two or more pins that are used make connections to the system standard accessories (such as power, mouse, printer,...etc.). The following is a list of connectors on board, as well as descriptions of each individual connector.
  • Page 13 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (E) CN4 USB 1 (Universal Serial Bus port 1) connector Pin # Assignment +5V DC DATA- DATA+ Ground Ground (F) CN5 AT Keyboard connector Pin # Assignment Pin # Assignment Keyboard Clock Keyboard Data No Connection...
  • Page 14 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (I) CN8 Parallel Port Connector (Supports SPP/EPP/ECP mode, using IRQ7 or IRQ5, ECP modes use DMA channel 3 or channel 1, and it can be programmed by CMOS setup) 1 14 Pin # Assignment Pin # Assignment...
  • Page 15 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (L) CN11 COM A (Serial Port 1) connector Pin # Assignment Pin # Assignment DCD (Data Carrier Detect) 2 RD (Received Data) TD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send)
  • Page 16 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (R) CN17 CPU Cooling Fan Power connector Pin # Assignment Ground +12V DC Fan Sense Signal (S) KEYLOCK Front Panel Power LED & Key-Lock connector Pin # Assignment Pullup (+5V DC for Power LED) No Connection...
  • Page 17 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (W) SL Sleep LED connector When ATX Power is Off : LED Turn On When ATX Power is On : LED Turn Off Pin # Assignment Pin # Assignment Signal Pin Ground (X) PW Power On / Off and External Suspend Switch Connector According to the setup in CMOS, the PW connector has two functions.

  • Page 18: Jumpers

    Please make sure all jumper settings are correct before you can start the installation. (A) JP13, JP14, JP15, JP16, JP17, JP18: CPU type selection The jumper settings to select the CPU type are different between PT-5V3T and PT-5VMT, please refer to the followings for the details (a) VT82C597AT (PT-5V3T) (1) 50MHz x 1.5...
  • Page 19 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (5) 60MHz x 2 (6) 66MHz x 2 JUMPERS CPU TYPE JUMPERS CPU TYPE 1 2 3 Intel 80502-120 1 2 3 Intel 80502-133 ¡ ¡ JP13 ¡ ¡ G JP13 ¡ ¡ G JP14 ¡...
  • Page 20 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (11) 60MHz x 3 (12) 66MHz x 3 JUMPERS CPU TYPE JUMPERS CPU TYPE IDT Win-Chip 1 2 3 Intel 80502-200 ¡ ¡ JP13 C6-180 ¡ ¡ G JP13 80503-200 ¡ ¡ G JP14 ¡ ¡...
  • Page 21 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (13) 66MHz x 5 JUMPERS CPU TYPE 1 2 3 ¡ ¡ G JP13 ¡ ¡ G JP14 ¡ ¡ G JP15 1 G G JP16 ¡ ¡ JP17 ¡ ¡ JP18 (b) VT82C598AT (PT-5VMT) (1) 60MHz x 1.5...
  • Page 22 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (5) 66MHz x 2 (6) 75MHz x2 JUMPERS CPU TYPE JUMPERS CPU TUPE 1 2 3 Intel 80502-133 ¡ ¡ G JP13 ¡ ¡ JP13 ¡ ¡ ¡ ¡ JP14 JP14 ¡ ¡ ¡ ¡...
  • Page 23 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (11) 66MHz x 2.5 (12) 75MHz x 2.5 JUMPERS CPU TYPE JUMPERS CPU TUPE 1 2 3 Intel 80502-166 ¡ ¡ G JP13 80503-166 ¡ ¡ JP13 ¡ ¡ ¡ ¡ JP14 AMD K5-PR166 JP14 ¡...
  • Page 24 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (19) 100MHz x 3 (20) 100MHz x 4 JUMPERS CPU TYPE JUMPERS CPU TUPE 1 2 3 ¡ ¡ G JP13 ¡ ¡ G JP13 ¡ ¡ G JP14 ¡ ¡ G JP14 ¡ ¡...
  • Page 25 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (B) JP7, JP8, JP9, JP10, JP11 CPU CORE voltage selection JUMPERS CORE Voltage IO Voltage CPU TYPE 1 G G JP7 ¡ ¡ AMD K5 ¡ ¡ 3.5V 3.5V Cyrix 6x86 ¡ ¡ JP10 IDT C6 ¡...
  • Page 26 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD JUMPERS CORE Voltage IO Voltage CPU TYPE 1 G G JP7 ¡ ¡ 1 G G JP9 3.1V 3.3V ¡ ¡ JP10 ¡ ¡ JP11 JUMPERS CORE Voltage IO Voltage CPU TYPE 1 G G JP7 ¡...
  • Page 27 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD JUMPERS CORE Voltage IO Voltage CPU TYPE 1 G G JP7 1 G G JP8 ¡ ¡ 2.7V 3.3V ¡ ¡ JP10 ¡ ¡ JP11 JUMPERS CORE Voltage IO Voltage CPU TYPE 1 G G JP7 1 G G JP8 ¡...
  • Page 28 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD JUMPERS CORE Voltage IO Voltage CPU TYPE 1 G G JP7 1 G G JP8 1 G G JP9 2.3V 3.3V ¡ ¡ JP10 ¡ ¡ JP11 JUMPERS CORE Voltage IO Voltage CPU TYPE 1 G G JP7...
  • Page 29 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD (C) JP1 ROM BIOS selection (option) Different types of Flash ROM can be used on the mainboard and they may have different DV voltage requirement. Basically, the jumper setting is always made by factory and you do not have to make any change on this jumper. Following is the...

  • Page 30: Installing A Cpu Onto The Zif Socket

    PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD 3.3 INSTALLING A CPU ONTO THE ZIF SOCKET The ZIP type Socket located on U13 is the so called Socket 7. It is designed for the Pentium or other equivalent processors. inserting the Pentium processor onto the Socket 7, certain precautionary steps must be followed.
  • Page 31 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD 3.Press the lever down. The plate will slide forward. You will feel some resistance as the pressure starts to secure the CPU in the socket. When the CPU is installed, the lever will snap into place at the side of the socket.

  • Page 32: Installation Of Cpu Cooling Fan

    PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD 3.4 INSTALLATION OF CPU COOLING FAN Improper installation of CPU cooling fan may cause serious damage to the motherboard. Please follow the procedures carefully: 1.There is a metal clip attached to the CPU cooler as shown below.

  • Page 33: Upgrade The System Memory

    PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD 4.Push down the opposite side of the metal clip firmly and carefully to lock the cooler in place. 3.5 UPGRADE THE SYSTEM MEMORY There are two 72-pin SIMM sockets (SIMM1, SIMM2) and two 168-pin DIMM sockets (DIMM1, DIMM2) on the mainboard where we can install maximum 1GB memory on the mainboard.

  • Page 34: Install The Dimm Module

    PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD Push the SIMM module forward onto the positioning pins. The retaining clips should fit over the edge and hold the SIMM in place. 3.5.2 Install the DIMM Module Insert the DIMM module into the socket as shown in the left picture.

  • Page 35: Suggested Memory Modules

    3.5.3 Suggested Memory Modules The PT-5V3T / 5VMT system board has three banks of main memory (bank0 - 2) on board, (using two 72-pin SIMM sockets - SIMM 1-2, and two 168-pin DIMM sockets - DIMM 1-2) each bank can be single-sided or double-sided, 8MB up to 1GB of local memory can be populated on the board.
  • Page 36 PT-5V3T/5VMT HARDWARE SETUP SYSTEM BOARD In order to make the mainboard working, at least one bank of memory have to be installed on the board. The “BANK” is the definition of the memory subsystem addressing. Please refer to the following for the definition of “BANK”...

  • Page 37: Award Bios Setup

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD 4. AWARD BIOS SETUP 4.1 GETTING STARTED When the system is powered on or reset, the BIOS will execute the Power-On Self Test routines ( POST) and checks the functionality of every component in the PC system.

  • Page 38: Main Menu

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD After the POST routines are completed, you will find the following message appears on the lower-left screen : “ Press DEL to enter SETUP ” To execute the Award BIOS Setup program, press the DEL key and the “MAIN MENU”...

  • Page 39: Standard Cmos Setup

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD Arrow Keys : Use the arrow keys to move the cursor to the desired item. Enter : To select the desired item. : Display the help screen for the selected feature. (Shift)F2 : To change the screen color, total 16 colors.
  • Page 40 PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD MODE: The BIOS on the mainboard is the updated one and which provides three different modes to support both normal size IDE hard disk drive and the hard disk drive which is above 528MB: l NORMAL : For IDE hard disk drives which is smaller than 528MB.

  • Page 41: Bios Features Setup

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD 4.5 BIOS FEATURES SETUP ROM PCI / ISA BIOS (2A5LEXXX) BIOS FEATURES SETUP AWARD SOFTWARE, INC. Virus Warning Disabled Video BIOS Shadow : Enabled CPU Internal Cache : Enabled C8000-CBFFF Shadow : Disabled External Cache...
  • Page 42 PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD see whether your system is infected by a virus or not. Enabled : Activate automatically when the system boots up causing a warning message to appear on the screen when anything attempts to access the boot sector of the hard disk partition table.

  • Page 43: Chipset Features Setup

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD 4.6 CHIPSET FEATURES SETUP ROM PCI / ISA BIOS (2A5LEXXX) CMOS SETUP UTILITY CHIPSET FEATURES SETUP Bank 0/1 DRAM Timing 70 ns OnChip USB : Disabled Bank 2/3 DRAM Timing : 70 ns USB Keyboard Support...

  • Page 44: Power Management Setup

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD 4.7 POWER MANAGEMENT SETUP ROM PCI / ISA BIOS (2A5LEXXX) POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. Power Management User Define Primary INTR : ON PM Control by APM : Yes IRQ3 (COM 2) : Primary Video Off Option : Suspend->Off...

  • Page 45: Pnp/Pci Configuration

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD 4.8 PNP/PCI CONFIGURATION ROM PCI / ISA BIOS (2A5LEXXX) PNP/PCI CONFIGURATION AWARD SOFTWARE, INC. PNP OS Installed CPU to PCI Write Buffer : Enabled Resources Controlled By : Manual PCI Dynamic Bursting : Enabled...
  • Page 46 PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD Reset Configuration Data : Disabled : The system BIOS will do nothing. Enabled : The system BIOS will clear/reset the ESCD during “POST”. After clearing ESCD, the system BIOS will then change this item‘s value back to “Disable”,...
  • Page 47 PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD Explanation for technical issues : PnP device : Ÿ Device that has Plug & Play compatibility. That means it will request for DMA, IRQ, I/O and Memory from the PnP BIOS and all these requests can be re- locatable.

  • Page 48: Integrated Peripherals

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD Ÿ 4.9 INTEGRATED PERIPHERALS ROM PCI/ISA BIOS (2A5LEXXX) INTEGRATED PERIPHERALS AWARD SOFTWARE, INC. On-Chip IDE First Channel Enabled Onboard Parallel Port : 378 / IRQ 7 On-Chip IDE Second Channel : Enabled Parallel Port Mode...

  • Page 49: Load Setup Defaults

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD 4.10 LOAD SETUP DEFAULTS If you lost the CMSO data or you don’t know how to complete the setup procedure, you may use this option to load the SETUP default values from the BIOS default table. It is easy to load the default value, simply highlight the “LOAD SETUP DEFAULTS”...

  • Page 50: Ide Hdd Auto Detection

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD 4.12 IDE HDD AUTO DETECTION In order to make the IDE hard disk known to the system, you need to tell the system what kind of hard disk is connected to the mainboard by giving a set of hard disk parameters.

  • Page 51: Save &Exit Setup

    PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD 4.14 SAVE &EXIT SETUP This option will save all setup values to CMOS RAM & EXIT SETUP routine, by moving the selection bar to “SAVE & EXIT SETUP” and pressing “Enter” key, then types “Y” and “Enter” key, the values will be saved and all the information will be stored in the CMOS memory, and then the setup program will be terminated and the system will start to reboot.
  • Page 52 PT-5V3T/5VMT AWARD BIOS SETUP SYSTEM BOARD Printed in Taiwan Edition : 02 / 20 / 98 4-16...

This manual is also suitable for:

Pt-5vmt

Table of Contents