Front Panel - NETGEAR GS724TPv2 Hardware Installation Manual

GS724TPv2 ProSAFE 24-Port Gigabit Smart Managed Switch with PoE+ and 2 SFP Ports

Front Panel

The switch provides twenty four 10/100/1000BASE-T RJ-45 PoE+ ports and two SFP ports. The following
figure shows the front panel.
Figure 1. Front panel
Table 1. Front panel
Number Description
1 Power, Fan, and PoE Max LEDs.
For more information, see
2 Reset button.
For more information, see
3 48 LEDs associated with the 24 Ethernet ports. For each port, the associated upper LED functions as the
combined speed and activity LED and the associated lower LED indicates the PoE status.
2 LEDs associated with the 2 SFP ports. For each port, the associated LED functions as the combined
link and activity LED.
For more information, see
4 24 independent 10/100/1000BASE-T RJ-45 PoE ports.
For more information, see
5 2 dedicated SFP fiber ports in which you can install GBICs for fiber connections.
For more information, see
6 Factory Defaults button.
For more information, see
LEDs on page 11.
Reset Button on page 13.
LEDs on page 11.
RJ-45 Ports for 10/100/1000BASE-T Ethernet Connectivity
SFP Ports for Fiber Connectivity
Factory Defaults Button on page 13.
Hardware Overview
10
on page 12.
on page 13.