NETGEAR GS724TPv2 Hardware Installation Manual page 14

Installation
This chapter describes the installation procedures for the switch.
Switch installation involves the steps that are described in the following sections:
• Step 1: Prepare the site
• Step 2: Protect Against Electrostatic Discharge
• Step 3: Unpack the Switch
• Step 4: Mount or Place the Switch
• Optional Step 5: Install SFP Transceiver Modules
• Step 6: Attach Devices
• Step 7: Check the Installation
• Step 8: Apply AC Power and Check the LEDs
• Step 9: Manage the Switch
on page 15
on page 16
on page 17
on page 19
on page 19
on page 20
on page 20
on page 16
on page 18
14
3