Step 2: Protect Against Electrostatic Discharge; Step 3: Unpack The Switch - NETGEAR GS724TPv2 Hardware Installation Manual

Prosafe 24-port gigabit smart managed switch with poe+ and 2 sfp ports

Hide thumbs Also See for GS724TPv2:

Table of Contents

GS724TPv2 ProSAFE 24-Port Gigabit Smart Managed Switch with PoE+ and 2 SFP Ports

Step 2: Protect Against Electrostatic Discharge

WARNING:

Static electricity can harm delicate components inside your system.To prevent

static damage, discharge static electricity from your body before you touch

any of the electronic components, such as the microprocessor. You can do

so by periodically touching an unpainted metal surface on the switch.

You can also take the following steps to prevent damage from electrostatic discharge (ESD):

•

When unpacking a static-sensitive component from its shipping carton, leave it in the antistatic package

until you are ready to install it. Just before unwrapping the antistatic package, discharge static electricity

from your body.

•

Before moving a sensitive component, place it in an antistatic container or package.

•

Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench

pads, and an antistatic grounding strap.

The following figure shows the package contents for the switch.

Figure 3. Switch package contents

Check the contents of the boxes to make sure that all items are present before installing the switch.

Installation

Table of Contents