Maintenance - RD WORKS FP404R-Q Owner's Manual

5、Setting electro lock
Function of electro lock can avoid operation from children. Locking can be set in both
power-on and power-off modes.
And
And
Or
And
And

MAINTENANCE

1. Glass Information
* Under no circumstances should this product be operated with missing or broken glass.
* Do not strike or slam the glass.
* Do not use abrasive cleaners to clean the glass.
* Replacement glass is available from the manufacturer and replacement should be
carried out by a qualified service person.
2. Cleaning
* To clean the unit, first turn off controls on unit and unplug unit from power source.
*To clean the glass door: remove dust with clean dry cloth or to remove finger prints and
other marks clean glass with clean damp cloth. Do not use abrasive cleaners or spray
liquids on glass door surfaces.
*Metal and metal painted parts should be cleaned with clean damp cloth only. Do not
use abrasive cleaners or spray liquids on this surface.
3. If you do not use the heater for a long time, please take out the remote batteries (to
prevent corrosion) as shown below. Store the remote in a safe place.
4.
PUSH
Lid
Press Temp Up and Temp Down buttons once for 3
Or seconds. Locking is fulfilled when a buzzer rings. When
locked, control panel and remote control failed to function.
When release is needed, please re-press Temp Up and
Temp Down buttons once for 3 seconds. Release is fulfilled
when a buzzer rings. Lock indication disappears. Control
panel and remote control return to function.
Battery
10
Lid