RD WORKS FP404R-Q Owner's Manual page 9

Or
3. Setting flame
Or
4. Setting timer-power- off
Caution! ONLY under power-on mode you can set timer-power-off function.
Or
Or
4、Setting timer-power-on
Caution! ONLY under power-off mode you can set timer-power-on function.
Or
Or
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
Set temperature indication varies from 59℉ to 95℉. Once
you have chosen the desired temperature, the heater will
remain on until the room temperature increases to the
temperature on the digital display. The heater will cycle on
and off to maintain the desired room temperature.
Adjust the brightness of the flame and turn off
When starting the unit, press the timer button on the
control panel.
Adjust the time by pressing the arrows on the control panel
or remote control.
Digital display turns set temperature to time value for the
timer. Press the UP or DOWN button more than once, the
value will vary from 0 to 12hr (1 hr interval) in circulation.
Under power-off, press the timer button on the control
panel.
Adjust the time by pressing the arrows on the control panel
or remote control.
Digital display turns set temperature to time value for the
timer. Press the UP or DOWN button more than once, the
value will vary from 0 to 12hr (1 hr interval) in circulation.
9