RD WORKS FP404R-Q Owner's Manual page 8

Main switch
1、Start and select working mode
Or
Or
2、Setting room temperature
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Once power is off, heating element will stop working at
first. Fan will prolong working for 3min to emit plenty of
heat inside. Then shut OFF automatically.
Select a heat setting.
Press the HEATER button to toggle between the two heat
settings.
Power for heat-up mode is 1500W; heat-down is 1000W,
and turn off the heat.
8