3) Remove two screws 9, then remove the front frame M.
9
M
Fig. 1-13
4) Remove two screws 10, and then the CCD board has re-
moved with the CCD image sensor.
CCD board
Fig. 1-14
5) Detach the CCD image sensor and sensor holder N slowly
in the direction of the arrow.
Fig. 1-15
1-4
1.4.2 Installing of CCD image sensor
Note:
Before installation, take notes of the code of the CCD
image sensor. It needs to refer to this code for adjust-
ment.
1) When installing the CCD image sensor, pay attention to its
orientation.
2) For installing a new CCD image sensor to the set, perform
reassembling parts in the reverse order of removing.
10
3) Adjust the V
N
CCD board
1st. pin Index
V
code
RGL
A
ICX0**AK-
and V
voltage. (See subsection 2.7)
SUB
RGL
V
code
SUB