Receiving An Incoming Call - Mazda CX-52017 Owner's Manual

NOTE
Mobile 911 is a secondary function of

the audio entertainment system.
Therefore, the mobile 911 function
does not assure that the call is always
made to 911 after an accident occurs.
A Hands-free device must be paired and

connected. The 911 operator can verify
the vehicle's position information using
the Hands-free device GPS if equipped.

▼ Receiving an Incoming Call

When an incoming call is received, the incoming call notification screen is displayed. The
"Incoming Call Notifications" setting must be on.
Refer to Communication Settings on page 5-105.
To accept the call, press the pick-up button on the audio control switch or select
the screen.
To reject the call, press the hang-up button on the audio control switch or select
screen.
The following icons are displayed on the screen during a call. Icons which can be used
differ depending on use conditions.
Icon
Displays the Communication menu.
Ends the call.
Transferring a call from hands-free to a mobile phone
Communication between the Bluetooth
and an incoming call will be received by the device (mobile phone) like a standard call.
Transferring a call from a device (mobile phone) to hands-free
Communication between devices (mobile phone) can be switched to Bluetooth
Hands-Free.
Mute
The microphone can be muted during a call.
When selected again, the mute is canceled.
To make a 3-way call, select the contacts from the following:
The device may be unusable depending on the contractual content.
: Call History is displayed.
: The phonebook is displayed.
: The dial pad is displayed. Input the phone number.
Audio Set [Type B (touchscreen)]
1. If the vehicle is involved in a moderate
to severe collision, notification of the
call to 911 is made via audio and
screen display. To cancel the call, press
button within 10 seconds.
2. If
hang-up button is not pressed within
10 seconds, the call is made to 911
automatically.
Function
®
unit and a device (mobile phone) is canceled,
Interior Features
or hang-up
or
on
on the
®
5-101