Mazda CX-52017 Owner's Manual page 349

If the pairing failed, "Err" flashes

for three seconds.
Pairing cannot be performed while

the vehicle is moving. If you attempt
to perform pairing while the vehicle
is moving, "PAIR DISABLE" is
displayed.
If seven Bluetooth

have already been paired to the
vehicle, pairing cannot be performed
and "MEMORY FULL" is
displayed. Delete one paired device
to pair another one.
Pairing a Bluetooth
which does not have a four-digit PIN
code
1. Using the audio control dial, select the
pairing mode "PAIR DEVICE" in the
"BT SETUP" mode. (Refer to
®
"Bluetooth audio set up" for details.)
2. Press the audio control dial to
determine the mode. After "ENTER
PIN" is displayed on the audio display
for three seconds, "PIN 0000" is
displayed and the PIN code can be
input.
3. Press the audio control dial while "PIN
0000" is displayed. "PAIRING"
flashes on the audio display.
4. Operate the Bluetooth
and set it to the pairing mode while
"PAIRING" is flashing.
5. As the Bluetooth
requires a PIN code, input "0000".
6. When the pairing is completed,
"PAIR SUCCESS" are displayed after
about 10-30 seconds, after which
"PAIR SUCCESS" continues to be
displayed for three seconds, and then
the unit returns to the normal display.
Audio Set [Type A (non-touchscreen)]
®
audio devices
®
audio device
®
audio device
®
audio device
and
NOTE
If pairing cannot be completed, try

"1234" instead. Refer to the owner's
manual of your mobile device for the
right PIN code.
Some Bluetooth

a certain amount of time before the
symbol is displayed.
If the pairing failed, "Err" flashes

for three seconds.
Pairing cannot be performed while

the vehicle is moving. If you attempt
to perform pairing while the vehicle
is moving, "PAIR DISABLE" is
displayed.
If seven Bluetooth

have already been paired to the
vehicle, pairing cannot be performed
and "MEMORY FULL" is
displayed. Delete one paired device
to pair another one.
▼ Device selection (Bluetooth
If several devices have been paired, the
®
Bluetooth unit links the device last
paired. If you would like to link a different
paired device, it is necessary to change the
link. The order of device priority after the
link has been changed is maintained even
when the ignition is switched off.
1. Using the audio control dial, select the
link change mode "LINK CHANGE"
in the "BT SETUP" mode. (Refer to
®
"Bluetooth audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
Interior Features
®
audio devices need
®
audio devices
®
Audio)
5-39