Mazda CX-52017 Owner's Manual page 365

Commands useable anytime during
voice recognition
"Help" or "Go Back" are commands
which can be used at anytime during voice
recognition.
Help function use
The help function informs the user of all
the available voice commands under the
current conditions.
1. Say: [Beep] "Help"
2. Follow the prompts to receive the
appropriate voice guidance
instructions.
Returning to previous operation
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep] "Go Back"
To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:
The voice recognition cannot be

performed while voice guidance or the
beep sound is operating. Wait until
the voice guidance or the beep sound
is finished before saying your
commands.
Dialects or different wording other than

hands-free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
It is not necessary to face the

microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
Do not speak too slow or too loud.

Audio Set [Type A (non-touchscreen)]
Speak clearly, without pausing between

words or numbers.
Close the windows and/or the moonroof

to reduce loud noises from outside the
vehicle, or turn down the airflow of the
air-conditioning system while
Bluetooth
Make sure the vents are not directing air

up towards the microphone.
NOTE
If the voice recognition performance is not
satisfactory.
Refer to Voice Recognition Learning
Function (Speaker Enrollment) (Type A)
on page 5-56.
Refer to Troubleshooting on page 5-58.
Interior Features
®
Hands-Free is being used.
5-55