Mazda CX-52017 Owner's Manual page 382

Interior Features
Audio Set [Type B (touchscreen)]
Multicast channel selection (FM)
If multi-cast channels are available for an
broadcast currently being
received, the multi-cast channel list is
displayed. Select the desired radio station.
NOTE
If an analog broadcast is received once

and is received while HD1 is
selected, the audio unit switches to the
station automatically.
When the icon is illuminated, there

could be a noticeable difference in
sound quality and volume when a
change from digital to analog signals
occurs. If the sound quality and volume
become noticeably diminished or cut off,
select the icon to turn off
( icon is not illuminated).
Once an analog broadcast is received

when HD1 is selected from the Favorite
channels, it is switched to
automatically. If the radio reception
conditions are poor, or HD is off,
switching to
possible.
When an HD specialty channel (HD2 to

HD8) is selected from the Favorite
channels, "Signal Lost" is displayed
and no audio is output until
is received. If the radio reception
conditions are poor, "Signal Lost"
continues to be displayed.
If the icon is not illuminated,

information such as song titles of the
station are received, however,
the audio output is analog.
5-72
broadcasts is not
iTunes Tagging (for Apple devices with
USB use only)
By tagging a song currently being aired,
the song can later be purchased from the
iTunes Store. One hundred tags can be
stored. A maximum of 100 tags (for 100
songs) can be stored for later
downloading.
1. Select the icon. The tag is stored in
the audio unit.
2. Connect the device via the vehicle's
USB. Any stored tag(s) will be sent
automatically to the connected device.
3. Once at home or after parking the
vehicle safely, log onto the iTunes
Store with your device. Your
previously tagged song(s) can now be
easily purchased.
NOTE
Both AM and FM

used.
Because iTunes tagging only supports

purchases from the iTunes Store, direct
downloading of music from the vehicle's
audio unit is not possible.
If the available memory for the

connected device is insufficient, the tag
is not sent.
If an error occurs while the tag is being

sent, reconnect the device.
can be