Mazda CX-52017 Owner's Manual page 257

All the doors are closed.

The driver's seat belt is fastened.

The selector lever is in the drive (D) position or manual (M) position (manual mode).

NOTE
In the following cases, the Mazda Radar Cruise Control with Stop & Go function (MRCC

with Stop & Go function) system is canceled when the vehicle is traveling at 30 km/h (19
mph) or less and "Mazda Radar Cruise Control disabled under 30 km/h" is displayed in
the multi-information display.
The Forward Sensing Camera (FSC) cannot detect target objects (There is problem

with the Forward Sensing Camera (FSC) or windshield is dirty).
There is a problem with the stop hold control function.

There is a problem with the electric parking brake (EPB).

It may not be possible to set the Mazda Radar Cruise Control with Stop & Go function

(MRCC with Stop & Go function) system directly after starting the engine, while the DSC
operation is being checked.
Turning on the system
When the MODE switch is pressed once, the Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function) system turns on, and the Mazda Radar Cruise
Control with Stop & Go function (MRCC with Stop & Go function) system main indication
(white) turns on and the vehicle speed and the distance between the vehicles while in
headway control can be set.
switch
switch
MODE switch
When Driving
i-ACTIVSENSE
SET+ switch
RES switch
SET- switch
CANCEL switch
OFF switch
4-119