Eizo DuraVision FDF4627W-IP Manual page 24

7.
Set the positions for displaying the network camera images.
1. Press .
The "After Change" list box is selected.
2. Set a network camera to a position for displaying images.
Select the list box of a display position you wish to set and press
Select a network camera with
3. After completing the setting, press
4. Select "Next" and press
Attention
• All cameras discovered at step 6 must be set. A network camera can only be set for one display position.
When there are incorrect settings, "Next" cannot be selected.
8.
Finish Easy Setup.
1. Check that "End" is selected and press
The setting complete screen is displayed. Press
Easy Setup is completed.
22
or and press .
.
.
.
to select "OK".
1
Indicates the display
positions on the monitor
screen.
4
.
1