Eizo DuraVision FDF4627W-IP Manual page 22

3. After completing the setting, select "Apply" and press
The setting complete screen is displayed. Press
4. Select "Next" and press
The network camera automatic discovery screen is displayed.
6.
Automatically discover network cameras.
1. Select "Camera Discovery", then press
2. Select the camera type using
3. Check that "Start" is selected and press
The user authentication screen is displayed.
4. Enter the "Username" and "Password" specified in the network camera.
The following values are entered as the default settings. Change the settings if necessary.
Please contact your administrator for the username and password.
- Username: "admin"
- Password: "12345"
20
to select "OK".
.
.
, then press
or
.
.
.
2
4
5