Flex BHW 1549 VR Manual page 13

Drilling unit
Safety instructions for drilling unit
t^okfkd>
oÉ~Ç=~ää=ë~ÑÉíó=áåëíêìÅíáçåë=~åÇ=çíÜÉê=
áåëíêìÅíáçåëK=c~áäìêÉ=íç=çÄëÉêîÉ=íÜÉ=ë~ÑÉíó=
áåëíêìÅíáçåë=~åÇ=çíÜÉê=áåëíêìÅíáçåë=ã~ó=êÉëìäí=
áå ~å=ÉäÉÅíêáÅ=ëÜçÅâI=ÑáêÉ=~åÇLçê=ëÉêáçìë=áåàìêáÉëK=
hÉÉé=~ää=ë~ÑÉíó=áåëíêìÅíáçåë=~åÇ=çíÜÉê=
áåëíêìÅíáçåë=áå=~=ë~ÑÉ=éä~ÅÉ=Ñçê=íÜÉ=ÑìíìêÉK
 This electric power tool is to be used
as a drilling unit with the designated
tools and accessories.
Observe all safety information, instruc-
tions, diagrams and data which you
receive with the power tool.
If you do not observe the following instruc-
tions, an electric shock, fire and/or serious
injuries may occur. If the electric power
tool is not used as intended, the user
may be exposed to hazards and may
be injured.
 Never use accessories which the manu-
facturer did not intend or recommend
especially for this electric power tool.
Just because you can attach the acces-
sory to your electric power tool does not
guarantee safe use.
 Wear ear protection.
The effect of noise may result in loss
of hearing.
 When working, hold the electric power
tool firmly with both hands on the desig-
nated handles and ensure that you have
a secure footing.
The electric power tool is controlled more
securely if held with both hands.
 Use suitable detectors to detect concea-
led power supply cables or consult your
local supply company.
Contact with electric cables may result
in a fire and/or electric shock.
A damaged gas pipe may cause an
explosion. Drilling into a water pipe
will cause damage to property or may
cause an electric shock.
 Keep the power cord away from rotating
insertion tools. If you lose control of the
appliance, the power cord could be seve-
red or become caught and your hand or
arm may strike the rotating insertion tool.
 Secure the workpiece.
A workpiece is held more securely in
a clamping device or vice than by hand.
 Wait until the electric power tool has
come to a standstill before putting it
down.
The insertion tool may jam and cause you
to lose control of the electric power tool.
 These machines may be operated with
the supplied PRCD switch only.
Before using the machine, always check
the PRCD switch.
 Before performing any work on the elec-
tric power tool, pull out the mains plug.
 Repairs to the electric power tool, such
as replacement of the power cord, may
be performed by the manufacturer's
customer service only.
13