Answer Call Ringing On Another Extension In Group Or In Associated Group - Cisco DX650 User Manual

Call transfer

Answer call ringing on another extension in group or in associated group

Procedure
Step 1
Tap Pickup.
If your phone supports autopickup, you are now connected to the call.
Step 2 If the call rings, tap Answer to connect to the call.
Answer call ringing on particular extension
Procedure
Step 1 Tap Group Pickup.
Step 2 Enter the line number with the call that you want to pick up. For example, if the call that you want to pick up
is ringing on line 12345, enter 12345.
If your phone supports autopickup, you are now connected to the call.
Step 3
If the call rings, tap Answer to connect to the call.
Call transfer
Transfer redirects a call. The target is the number to which you want to transfer the call.
Tips
• If on-hook transfer is enabled on your phone, you can either hang up to complete the call, or tap Transfer
• If on-hook transfer is not enabled on your phone, hanging up without tapping Transfer again places the
• You cannot use Transfer to redirect a call that is on hold. Tap Resume to remove the call from hold
• When a call is chaperoned, the call chaperone cannot use transfer.
• To redirect a call to a voice message system, tap iDivert.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
42
and then hang up.
call on hold.
before transferring it.
Calling tasks
OL-28931-01