Board - Sony PMW-EX3 Service Manual

2-2-26. RE-260 Board
1. Refer to Sections from 2-2-1 to 2-2-3, 2-2-5,
2-2-9, 2-2-13, 2-2-21, 2-2-24 and 2-2-25, and
disassemble the unit up to "CN-3023 Board"
removal.
2. Remove the four screws, and lift up the RE-
260 board in the direction of arrow A.
3. Disconnect the CN-3022 board connector
(CN2) from the RE-260 board connector
(CN200) in the direction of arrow B, and
remove the CN-3022 board.
4. Remove the RE-260 board from the EX-DD
bracket in the direction of arrow C.
5. Reinstall the removed parts by reversing the
steps of removal.
PMW-EX3
A
B
CN2
CN-3022 board
C
CN2
CN-3022 board
EX-DD bracket
CN200
RE-260 board
M2 x 4
(Silver)
CN200
RE-260 board
2-29