Firmware Upgrade - Sony PMW-EX3 Service Manual

1-5. Firmware Upgrade

Upgrade the firmware for the PMW-EX3 through a USB connection to a computer.
For detailed information about the upgrade procedure, check the readme file that comes with the upgrade
software.
For inquiry or comments about the firmware upgrade, please contact your local Sony Sales Office/Service
Center.
Firmware Upgrade Procedure
Download the software for the new firmware upgrade onto the computer before starting these operations.
1. Check that the power switch on the PMW-EX3 is turned OFF.
2. Remove the pad sub assembly and pad center cover. (Refer to Section 2-2-3.)
USB maintenance connector
3. Use the USB connector that comes with the PMW-EX3 to connect the computer and the USB
maintenance connector.
4. Switch the power switch to CAMERA and turn the power ON.
5. Run the software for the firmware upgrade on the computer.
6. When the upgrade is complete, turn OFF the power and remove the USB cable.
7. Attach the pad sub assembly and pad center cover.
When the PMW-EX3 is connected to the computer for the first time, the driver software will need to be
installed into the computer. For more details, check the readme file that comes with the upgrade software.
1-12
PMW-EX3