Sony PMW-EX3 Service Manual page 48

7. Remove the top key (frame) and the light
interception cushion from the SWC-48 board.
8. Remove the tape (SWC48) from the SWC-48
board.
9. Remove the three screws, and remove the
SWC-48 board from the bracket (frame/full
auto bracket).
10. Reinstall the removed parts by reversing the
steps of removal.
m
. Do not re-use the tape on which adhesive
agent is coated.
. When reinstalling the removed tapping
screw again, refer to note of section "2-2.
Replacement Procedures."
2-22
Light interception M2 x 4
cushion
(Silver)
Top key
(frame)
M2 x 4
(Silver)
SWC-48 board
Volume
Fold
Bracket
(Frame/full auto bracket)
Bracket
(Frame/full auto bracket)
Tape
(SWC48)
SWC-48 board
Hole of
SWC-48 board
SWC-48 board
PMW-EX3