Technical Data - DeWalt DW03050 User Manual

Technical Data

Distance measurement
Typical Measuring Tolerance* ± 1.5 mm / 0.06 in **
Range at Target Plate 50 m / 164 ft
Typical Range* 40 m / 132 ft
Range at unfavourable 35 m / 115 ft
condition ***
Smallest unit displayed 1 mm / 1/16 in
Ø laser point 6 / 30 mm
at distances (10 / 50 m)
General
Laser class 2
Laser type 635 nm, < 1 mW
Beam divergence 0.16 x 0.6 mrad
Impulse duration 0.2 x 10
Protection class IP54 (dust- and splash
water protected)
Autom. laser switch off after 90 s
Autom. power switch-off after 180 s
Battery durability (2 x AAA) up to 3000 measure-
ments
Dimension (H x D x W) 120.5 x 55 x 33.7 mm
4.7 x 2.2 x 1.3 in
Weight (with batteries) 127 g / 4.48 oz
Temperature range:
- Storage -25 to 70 °C
-13 to 158 °F
- Operation 0 to 40 °C
32 to 104 °F
* applies for 100 % target reflectivity (white painted
wall), low background illumination, 25 ºC
** Tolerances apply from 0.05 m to 10 m with a confi-
dence level of 95%. The maximum tolerance may
deteriorate to 0.15 mm/m between 10 m to 30 m and
to 0.2 mm/m for distances above 30 m
*** applies for 100 % target reflectivity, background
illumination of approximately 30'000 lux
-9 -9
s - 0.8 x 10 s
Dewalt DW03050
Functions
Distance measuring yes
Permanent measuring yes
Addition/Subtraction yes
Area yes
Volume yes
Pythagoras 2-point, 3-point
Memory 5 results
EN
9