Advertisement
COMPATIBILTY TABLE
The Universal Garage Door Opener Remote Control is compatible
with:
Brand
Chamberlain
Chamberlain
Chamberlain
Merlin
Merlin
Merlin
ATA
ATA
ATA
B&D
B&D
HomEntry
Avanti
Boss
Visit chamberlaindiy.com.au/universal or chamberlaindiy.co.nz/universal
for up to date information on the models that the universal remote is
compatible with.
CUSTOMER SERVICE
Australia 1800 638 234 or chamberlaindiy.com.au/universal
New Zealand 0800 653 667 or chamberlaindiy.co.nz/universal
Code Type
Security+2.0
Security+
Billion
Security+2.0
Security+
Legacy
TrioCode128
TrioCode
SecuraCode
TriTran+
TriTran
Rolling
Rolling
Fixed
Frequency
433.30/433.92/434.54MHz
433.92MHz
433.92MHz
433.30/433.92/434.54MHz
433.92MHz
433.92MHz
433.47/433.92/434.37MHz
433.47/433.92/434.37MHz
433.92MHz
433.47/433.92/434.37MHz
433.47/433.92/434.37MHz
433.30/433.92/434.54MHz
433.92MHz
433.92MHz
2
Advertisement
Need help?
Do you have a question about the MC100AML and is the answer not in the manual?
Questions and answers
How to program the Chamberlain Universal Remote Control MC100AML to the Steel-Line SD800
To program the Chamberlain MC100AML Universal Remote Control to the Steel-Line SD800, follow these steps:
1. Make sure the garage door is closed and clear of obstructions.
2. On the MC100AML remote, press and hold the bottom button until the blue LED stays solid (about 15 seconds), then release it.
3. On the SD800 opener, press and hold the LEARN button for 2–3 seconds, then release it.
4. On the remote, press and release the button you want to program. The blue LED will blink for up to 60 seconds.
This completes the programming process.
This answer is automatically generated
Yes, but the On the SD800 opener has no learning button. They have a button combination like P + and - and he has stopped the problem when I follow the instructions of the SD 800 it’s not coupling
If the Chamberlain MC100AML is not coupling with the SD800 opener and there is no visible LEARN button, follow these steps to troubleshoot:
1. Check LED Indicator: Press a button on the remote. If the LED does not illuminate, replace the battery with a CR2032.
2. Locate Receiver: If the opener has no visible LEARN button, check for an external receiver with an antenna. Some receivers may require removing a cover to access the LEARN button.
3. Identify LEARN Button: The LEARN button may be labeled as CODE, CODE SET, DOOR CODE, RADIO SET, “S”, or similar. It may also be a different color than other buttons.
4. Compatibility: Ensure the SD800 opener operates on 433.92 MHz, as the MC100AML remote only supports this frequency.
If the opener lacks a LEARN button and is not compatible with 433.92 MHz, the MC100AML may not work with it.
This answer is automatically generated
Yes they have the same 433.93 and I checked no external receiver. But I can send a pic of the 800