Chamberlain MC100AML Manual
  1. Manuals
  2. Brands
  3. Chamberlain Manuals
  4. Garage Door Opener
  5. MC100AML
  6. Manual
Chamberlain MC100AML Manual

Chamberlain MC100AML Manual

Universal garage door opener remote control
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

MC100AML
UNIVERSAL GARAGE DOOR OPENER

REMOTE CONTROL

The Universal Garage Door Opener Remote
Control can be programmed to operate up to two
motors. Each button on the remote control works
independently of the other and must be
programmed separately.
The images throughout this manual are for
reference only and your product may differ from
the images shown.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MC100AML and is the answer not in the manual?

Questions and answers

Related Manuals for Chamberlain MC100AML

Summary of Contents for Chamberlain MC100AML

  • Page 1: Remote Control

    MC100AML UNIVERSAL GARAGE DOOR OPENER REMOTE CONTROL The Universal Garage Door Opener Remote Control can be programmed to operate up to two motors. Each button on the remote control works independently of the other and must be programmed separately. The images throughout this manual are for reference only and your product may differ from the images shown.
  • Page 2 To prevent possible SERIOUS INJURY or DEATH from a moving door: • ALWAYS keep remote controls out of reach of children. NEVER permit children to operate or play with remote control transmitters. • Activate a door ONLY when it can be seen clearly, is properly adjusted and there are no obstructions.
  • Page 3 EASYLIFTER R, CAD P DIAMOND, CAD P DIAMOND WQ, CAD P DIAMOND PD Boss Fixed 433.92MHz RADIO RD 11, BOL6 (433MHz Variant) Chamberlain Security +2.0 433.30 / 433.92 / LEARN or HandyLift Plus 2.0, HandyLift Deluxe 2.0, 434.54MHz “S” HandyLift MyQ, HandyLift Deluxe, PowerLift,...

  • Page 4: Programming Tips

    LOCATING THE LEARN BUTTON In order to program the Universal Remote, the LEARN button on the garage door opener must be located. This will need to be activated during the programming sequence. The LEARN button may also be labelled, CODE, CODE SET, DOOR CODE, RADIO SET, ‘S’, or similar.

  • Page 5: Programming The Remote

    PROGRAMMING THE REMOTE In order to program the Universal Remote, the LEARN button on the garage door opener must be located. Please refere to page 3 as well as the compatibility table on page 2 for the lean button label used for various brands.
  • Page 6 ATA BRANDED OPENERS These programming instructions are for ATA branded garage door openers. Read through all steps before commencing, and become familiar with the control buttons. Once the programming sequence has commenced its important to continue from one step to another reasonably quickly. Time between some steps is critical.

  • Page 7: Frequently Asked Questions

    FREQUENTLY ASKED QUESTIONS How do I program the other button on the Universal Remote Control? After pressing the LEARN button on the motor, go through the same programming method using the other button. This process will not over write the first button. The initial 15 second press to put the remote into learn mode must be performed using the bottom button.
  • Page 8 1 year from the date of purchase. The benefits given to you under this Chamberlain Limited Warranty are in addition to any rights and remedies that you may have under Australian or New Zealand consumer protection laws.

Table of Contents