Cleaning And Maintenance - Saeco XELSIS SM7581 User Manual

Hide thumbs Also See for XELSIS SM7581:

Quick start manual (2 pages)

Table Of Contents

Table of Contents

2 Open the lid of the bean hopper.

3 Tap the ESPRESSO icon. Then press the start/stop

4 When the grinder starts grinding, press down the grind setting knob and turn it to the left or right.

Handling the brew group

Go to www.saeco.com/care for detailed video instructions on how to remove, insert and clean the

brew group.

Removing the brew group from the machine

1 Switch off the machine by pressing the main switch on the back of the machine.

2 Remove the coffee grounds container.

3 Open the service door (Fig. 16).

4 Remove the coffee residue drawer (Fig. 17).

5 Press the PUSH button (Fig. 18) and pull at the grip of the brew group to remove it from the

machine (Fig. 19).

Reinserting the brew group

Before you slide the brew group back into the machine, make sure it is in the correct position.

1 Check if the arrow on the yellow cylinder on the side of the brew group is aligned with the black

arrow and N (Fig. 20).

If they are not aligned, push down the lever until it is in contact with the base of the brew group

(Fig. 21).

2 Make sure that the yellow locking hook on the other side of the brew group is in the correct

position.

To position the hook correctly, push it upwards until it is in uppermost position (Fig. 22).

3 Slide the brew group back into the machine along the guiding rails on the sides until it locks into

position with a click. Do not press the PUSH button.

4 Place back the coffee residues drawer and close the service door. Then place back the coffee

grounds container.