Changing A Handset's Internal Number; Using A Handset As A Room Monitor - Gigaset C590 User Manual

Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / registr_sett.fm / 28.07.2009
Changing a handset's internal
number
A handset is automatically assigned the
lowest free number when it is registered.
If all six slots are occupied, if the assigned
to slot 6 is in idle mode, the new entry
overwrites the existing handset definition.
You can change the internal number of all
registered handsets (1–6).
u
§Options§
Assign Handset No.
r
§Save§
Using a handset as a
room monitor
If the room monitor is activated, a previ-
ously saved destination number is called
as soon as a set noise level is reached. You
can save an internal or external number in
your handset as the destination number.
All of the handset keys are deactivated,
with the exception o display keys and con-
trol key.
The room monitor call to an external
number is terminated after approximately
90 seconds. If the internal handset
doesn't answer the room monitor, the
ringing stops after about 3 minutes. call
When the room monitor is activated, all
keys are locked except the end call key.
The handset's speaker is muted.
When the room monitor is activated,
incoming calls to the handset are indi-
cated without a ringtone and only dis-
play on the screen. The display and keypad
Open the list of handsets. Your
own handset is indicated by
Open menu.
Select and press .
§OK§
Select number. All of the pos-
sible numbers: 1,2,3,4,5,6 dis-
play.
Press the display key to save
the input.

Using a handset as a room monitor

are not illuminated and advisory tones are
also turned off.
If you accept an incoming call, the room
monitor is suspended for the duration of
the call, but the function remains acti-
vate.
If you deactivate, then reactivate the
handset, the room monitor remains acti-
vated.
Warning!
u
Always check the operation of the
f
.
room monitor before using it. For
example, test its noise sensitivity.
Check the connection if you are
diverting the room monitor to an
external number.
u
When the function is switched on,
the handset's operating time is con-
siderably reduced. If necessary,
place the handset in the base/charg-
ing cradle. This ensures that the bat-
tery does not run down.
u
Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u
The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
Activating the room monitor and
entering the destination number
É
¢ ¢
v
¤
Change multiple line input:
Activation:
Select to activate.
On
Alarm to:
Select
Internal
External number: Select the number
from the directory (press the display
ö
key ) or enter it directly.
Internal number: Select the display
key
§Change§
Call All to call all registered handsets
¢
.
§OK§
Room Monitor
or External.
¢
Select the handset or
45