Panasonic AW-HR140EJ Operating Instructions Manual page 74

Web screen configurations (continued)
Chroma Level
Set here the color intensity (chroma level) of the images.
Setting range: OFF, -99% to 40%
Factory settings: 0%
White Balance Mode
Set the white balance mode.
Select the mode when the coloring is not natural because of the
nature of the light source or other factors.
If the white color serving as the reference can be recognized, subjects
can be shot with natural coloring.
Setting value:
ATW In this mode, the white balance is compensated for
automatically, even if changes occur in the light source or
color temperature, by a process of continuous and automatic
adjustment.
AWB A When [AWB A] or [AWB B] is selected and the white balance
AWB B is executed, the adjustment results obtained are stored in the
memory selected.
When [AWB A] or [AWB B] is then selected, the white balance
stored in the selected memory can be recalled.
3200K This is the white balance mode which is ideal when a 3200K
halogen light is used as the light source.
5600K This is the white balance mode which is ideal when 5600K
sunlight or fluorescent lighting is used as the light source.
VAR Specify a color temperature between 2000K and 15000K.
Factory settings: AWB A
AWB
This is used to execute automatic white balance (AWB) to set the
white balance. For further details, refer to page 28.
Color Temperature
Specify a color temperature between 2000K and 15000K.
This is enabled when [White Balance Mode] is set to [VAR].
Setting range: 2000K to 15000K
Factory settings: 3200K
R Gain
This enables the R gain to be adjusted.
Its setting takes effect when [AWB A], [AWB B] or [VAR] has been
selected as the [White Balance Mode] setting.
Setting range: -150 to +150
Factory settings: 0
B Gain
This enables the B gain to be adjusted.
Its setting takes effect when [AWB A], [AWB B] or [VAR] has been
selected as the [White Balance Mode] setting.
Setting range: -150 to +150
Factory settings: 0
ABB
This is used to execute automatic black balance (ABB) to set the
black balance. For further details, refer to page 29.
Pedestal
This item is used to adjust the black level (adjust the pedestal).
These parts become darker when a negative setting is selected and,
conversely, lighter when a positive setting is selected.
Setting range: -150 to +150
Factory settings: 0
R Pedestal
This enables the R pedestal to be adjusted.
The same R pedestal setting is used for all the scenes.
Setting range: -100 to +100
Factory settings: 0
B Pedestal
This enables the B pedestal to be adjusted.
The same B pedestal setting is used for all the scenes.
Setting range: -100 to +100
Factory settings: 0
Detail
Turn outline (i.e., image sharpness) adjustment on/off.
Setting value: Off / On
Factory settings: On
Master Detail
Perform outline (i.e., image sharpness) adjustment.
Higher values result in increased sharpness in outlines.
Setting range: 0 to 62
Factory settings: 0
V Detail Level
Adjust the vertical contour correction level.
Setting range: -7 to +7
Factory settings: 0
Detail Band
This is selected to set the boost frequency for Detail.
Higher frequencies result in a more detailed effect applied to the
subject.
Setting range: -7 (Low frequency) to +7 (High frequency)
Factory settings: 0
Noise Suppress
This is selected to reduce the screen noise which is generated by the
detail effect.
The higher the settings, the more the noise is reduced.
Setting range: 0 to 60
Factory settings: 1
Flesh Tone Noise SUP.
This function is selected to make the skin of the subjects to be shot
appear to be smoother and more attractive.
Higher setting values result in more enhanced effects.
Setting range: 0 to 31
Factory settings: 16
Gamma Type
Select the type of gamma curve.
Setting value:
HD HD (High Definition) video gamma characteristic.
FILMLIKE1 Characteristic capable of reproducing better gradation in
highlights than HD gamma.
FILMLIKE2 Characteristic capable of reproducing better gradation in
highlights than [FILMLIKE1].
FILMLIKE3 Characteristic capable of reproducing better gradation in
highlights than [FILMLIKE2].
Factory settings: HD
74