Image Capture Size; Osd Menu; Osd Menu Operation - Panasonic AW-HR140EJ Operating Instructions Manual

Web screen operations (continued)
1.
Menu switching [OSD Menu >>] / [Stream Menu >>]
Switch between menu displays.
Clicking [OSD Menu >>] when the Stream menu is displayed displays
the OSD menu.
Clicking [Stream Menu >>] when the OSD menu is displayed displays
the Stream menu.
2.
Multi-Screen list box [Multi-screen]
The live screen [Live] display method is selected here.
The IP videos of the connected camera are
displayed.
[Single]
[4Split 1/4 Group]
[4Split 2/4 Group]
You can view multiple IP videos on a single
screen by configuring the cameras for
multi-screen display beforehand in the [Multi-
[4Split 3/4 Group] screen setup] screen (→ page 83). (Multi
display mode)
[4Split 4/4 Group]
[16Split]
3.
Compression button [Compression]
When selected, the text on the button turns green,
and H.264 images are displayed.
The [H.264] button is enabled when the [H.264
[H.264]
transmission] setting of [H.264(1)] to [H.264(4)] on
the Video over IP is [On]. (→ page 68)
When selected, the text on the button turns green,
and JPEG images are displayed.
[JPEG]
<NOTE>
• In the following cases, the selection status of the [Compression]
buttons will return to the setting configured in the [Video over IP]
tab - [Initial display settings for "Live" page] - [Stream].
- When returning from another screen
- When the screen is updated
4.
Stream buttons [Stream]
These buttons appear only when H.264 images are displayed.
When selected, the text on the button turns green, and
the images in the main area appear according to the
[1]
settings configured for [H.264(1)]. (→ page 68)
When selected, the text on the button turns green, and
the images in the main area appear according to the
[2]
settings configured for [H.264(2)]. (→ page 68)
When selected, the text on the button turns green, and
the images in the main area appear according to the
[3]
settings configured for [H.264(3)]. (→ page 68)
When selected, the text on the button turns green, and
the images in the main area appear according to the
[4]
settings configured for [H.264(4)]. (→ page 68)
<NOTE>
• In the following cases, the selection status of the [Stream] buttons
will return to the setting configured in the [Video over IP] tab - [Initial
display settings for "Live" page] - [Stream].
- When returning from another screen
- When the screen is updated
• If the H.264 image resolution is set to [1920x1080] or [1280x720],
the image may be compressed depending on the size of the web
browser window.
5.
Image quality buttons [Image quality]
These buttons appear only when JPEG images are displayed.
When selected, images appear according to the
settings configured for [Quality1] in the [Image
[1]
quality(JPEG)] settings (→ page 68).
When selected, images appear according to the
settings configured for [Quality2] in the [Image
[2]
quality(JPEG)] settings (→ page 68).
• In the following cases, the selection status of the [Image quality]
button will return to the setting configured in the [Video over IP] tab -
[Initial display settings for "Live" page] - [Image quality(JPEG)].
- When returning from another screen
- When the screen is updated
6.
Image Capture Size buttons [Image Capture Size]
These buttons appear only when JPEG images are displayed.
[1920 x 1080]
[1280 x 720]
[640 x 360]
[320 x 180]
[160 x 90]
<NOTE>
• The resolution selected with [JPEG(1)], [JPEG(2)], and [JPEG(3)]
under [JPEG] in the [Video over IP] tab will be used.
• If the resolution is set to [1920x1080] or [1280x720], the image may
be compressed depending on the size of the web browser window.
• In the following cases, the selection status of the [Image Capture
Size] buttons will return to the setting configured in the [Video over
IP] tab - [Initial display settings for "Live" page] - [Stream].
- When returning from another screen
- When the screen is updated
7.
OSD Menu Operation [OSD Menu Operation]
[On / Off]
[Cancel]
[¡/¢/£/¤/OK]
8.
Camera button / Color bar button [CAM/BAR]
Use this to output the camera pictures.
[CAM]
Use this to output the color bar signals.
[BAR]
61
When selected, the text on the button turns
green, and the images in the main area appear
in 1920 x 1080 size.
When selected, the text on the button turns
green, and the images in the main area appear
in 1280 x 720 size.
When selected, the text on the button turns
green, and the images in the main area appear
in 640 x 360 size.
When selected, the text on the button turns
green, and the images in the main area appear
in 320 x 180 size.
When selected, the text on the button turns
green, and the images in the main area appear
in 160 x 90 size.
Use this to select whether the camera's on-
screen displays are to be shown.
It cancels the selection of the setting which
is being changed. It restores the pre-change
setting.
Use these to perform the menu operations.
The items are selected using the [¡/¢/£/¤]
buttons.
If a selected item has a sub menu, this sub
menu is displayed by pressing the [OK]
button.
When the cursor is moved to any item on
the bottom-level setting screen and the [OK]
button is pressed, the setting of the selected
item starts flashing.
A setting for a regular menu item is reflected
immediately if it is changed while it is still
flashing. However, there are a number of
menu items (Scene, Format and Initialize)
whose setting is reflected only after the [OK]
button has been pressed, causing the setting
to stop flashing and the new setting to be
entered.