Panasonic AW-HR140EJ Operating Instructions Manual page 103

Displaying the web screen using a mobile terminal (continued)
Preset
When this button is pressed, the buttons for selecting the preset
positions are displayed on the screen.
When one of the displayed buttons is pressed, the camera's
pan/tilt position moves to the preset position that was
registered ahead of time.
The settings that are reproduced at this position are the
settings which were established on the [Preset Scope] menu
(→ page 48, page 79, page 80).
Resolution switching
When this button is pressed, the buttons for selecting the resolution
are displayed on the screen.
The characters are displayed in green for the resolution button which
is currently selected.
The resolution configured with [JPEG(1)], [JPEG(2)], and [JPEG(3)] in
the [Video over IP] tab is displayed.
The images are displayed with a resolution of 1920 x 1080
pixels.
The images are displayed with a resolution of 1280 x 720
pixels.
The images are displayed with a resolution of 640 x 360
pixels.
The images are displayed with a resolution of 320 x 180
pixels.
The images are displayed with a resolution of 160 x 90
pixels.
<NOTE>
• Depending on the resolution set for [JPEG(1)], [JPEG(2)], and
[JPEG(3)], resolution switching may not be possible.
103