Panasonic AW-HR140EJ Operating Instructions Manual page 119

Specifications (continued)
Synchro scan:
• 59.94 Hz:
60.15 Hz to 642.21 Hz (255 steps)
• 50 Hz:
50.15 Hz to 535.71 Hz (255 steps)
Gamma: HD, FILMLIKE1, FILMLIKE2, FILMLIKE3
0.30 to 0.75 (Manual setting)
White balance: AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K
to 15000K)
Chroma amount variability:
OFF, –99% to 40%
Scene file: Scene1, Scene2, Scene3, Scene4
Intelligent functions:
Auto function for each of accumulation, gain, iris,
electronic shutter, ND, and ATW
Output format: 1080/59.94p, 1080/29.97p
1080/59.94i, 1080/29.97PsF
720/59.94p, 1080/50p, 1080/25p
1080/25PsF
*
*
1
Native output
*
2 Over 59.94i output
*
3
For 1080/25PsF, 50i may be displayed on the
monitor screen. Furthermore, for 1080/23.98PsF
and 29.97PsF, 59.94i may be displayed on the
monitor screen.
Synchronization system:
Internal/External synchronization (BBS/Tri-level sync)
Line input <AUDIO IN(1/2)>
Input impedance: High impedance
Input:
• 2 channels, XLR balanced input
• Input signal level: +4 dBu/0 dBu/–20 dBu (selectable in menu)
• Volume variable range: –40 dB to +12 dB (can be changed in 1 dB
steps in the menu)
Output:
• 4 channels, superimposed over SDI output
• Embedded audio output level:
FS-12 dB: –12 dBFS, FS-18 dB: –18 dBFS,
FS-20 dB: –20 dBFS (selectable in menu)
• Sampling frequency: 48 kHz (synchronized to video)
• Quantization bit rate: 24-bit (LPCM)
• Audio compression format (IP): G.726, AAC-LC (High quality)
, 1080/23.98p ,
1 2
* *
3 , 1080/23.98PsF
*
, 1080/50i,
1
*
3 , 720/50p
[Pan-tilt head unit]
Installation method:
Camera/pan-tilt head control:
IP connecting
cable
AW series
connecting cable/
standard protocol
connecting cable
*
4
Use of an STP (shielded twisted pair) cable is recommended.
• When connecting directly to a controller without an Ethernet
3 ,
*
hub, use a cross cable.
Pan/tilt operation speed:
Panning range:
Tilting range:
Quietness:
Vibration correction:
119
Stand-alone (Desktop) or suspended (Hanging)
• To ensure safety, the unit must be secured using
the mount bracket supplied.
• When connecting through a PoE++ hub:
LAN cable 4 (category 5e or above, straight
*
cable), max. 100 m (328 ft)
• When a PoE++ hub is not used:
LAN cable 4 (category 5 or above, straight
*
cable) max. 100 m (328 ft)
LAN cable 4 (category 5 or above, straight
*
cable), max. 1000 m (3280 ft)
Maximum speed 60°/s or higher
±175°
• For suspended installations, the positions of the
pins that determine the movement range must be
changed.
For further details, refer to "Changing the rotation
range (suspended installation)" (→ "Installation
Instructions").
–30° to 210°
• Depending on the pan or tilt position, the camera
may be reflected in the image.
• For suspended installations, the positions of the
pins that determine the movement range must be
changed.
For further details, refer to "Changing the rotation
range (suspended installation)" (→ "Installation
Instructions").
60°/s (NC45 or less)
D.I.S.S. (Dynamic Image Stabilizing System)