Limiters - Panasonic AW-HR140EJ Operating Instructions Manual

Limiters

This unit comes with settings (referred to as "limiters") that restrict the
panning and tilting movement ranges.
Depending on the installation location, obstacles that may come into
contact with the remote camera may exist within its movement range.
In such cases, setting the limiters before the obstacles will prevent
contact.
The positions of four limiters — namely, the upper, lower, leftmost and
right-most limits of the travel range — can be set.
Once they have been set, the positions will not be lost even after the
power has been turned off.
The limiters can be set or released by the controller or web setting
screen [Setup].
Whatever was set or released last takes precedence.
For the controller operations, refer to the Operating Instructions of the
controller.
<NOTE>
• If the limiter is set more inward than the position to be washed with the
washer fluid, the washer will not operate.
• The washer position must be changed to use the washer function.
For details, consult your dealer.
107