6
Reinstall the cartridge and turn the cartridge locking lever
downwards.
7
Close the front cover, then the side cover.
Replacing the toner cartridge
When the toner cartridge is completely empty:
• Toner Empty appears on the display.
• The Status LED lights red.
• The machine stops printing. The incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. For order
information for toner cartridges, see page 11.1.
Note
You can set the machine to disregard the Toner Empty
message and to continue printing. See page 9.7.
1
Open the side cover.
2
Open the front cover.
3
Turn the cartridge locking lever upwards to release the toner
cartridge.
4
Pull the toner cartridge out.
5
Remove the new toner cartridge from its bag.
9.4
<Maintenance>