Sending A Priority Fax - Samsung SCX-6345N User Manual

Note
When you want to cancel a fax job, press Stop at any time while
sending.
Sending a fax with automatic redialing
When the number you have dialed is busy or there is no answer, the
machine automatically redials the number every three minutes, up to
seven times according to the factory default settings.
When LCD shows Retry redial?, press OK to redial the number without
waiting. To cancel the automatic redialing, press Stop.
To change the time interval between redials and the number of redial
attempts, refer to next steps.
1 Press Machine Setup on the Control Panel.
2 Select Admin Setting. Login message pops up, then enter
password and press OK.
3 Press Setup tab > Fax Setup.
4 Press down arrow to down the screen.
5 Press Redial.
6 Select Redial Time Interval and Redial Attempts.
7 Press OK.
Sending a fax redialing the last number
1 Press Redial/Pause on the control panel.
2 Place the originals face up into the DADF, the machine
automatically begins to send.
3 Press Start on the control panel.
Delaying a fax sending
1 Press Fax from the Main screen.
2 Place the originals face up into the DADF.
3 Adjust the document settings in Image tab.
4 Select Duplex and Resolution options in Basic tab.
5 Press Advanced tab > Delay Send.
6 Press On.
7 Enter the name of job in Job Name with the popped up keyboard.
8 Enter Start Time using Right/Left arrows. Start Time is the sending
time of the fax.
Note
Start Time is the specific time you want the fax to be sent. You
can set Start Time within 24 hours basis.
9 Press OK to start storing the scanned original data into memory.
Note
To cancel delaying a fax, press Off.

Sending a priority fax

This function is used when a high priority fax need to be sent ahead of
reserved operations.
1 Press Fax from the Main screen.
2 Place the originals face up into the DADF.
3 Adjust the document settings in Image tab.
4 Select Duplex and Resolution options in Basic tab.
5 Press Advanced tab > Priority Send.
6 Press OK to start the urgent fax job.
Forwarding received/sent fax to another fax
machine or e-mail address
You can forward your incoming and outgoing faxes to another fax
machine or email address.
1 Press Machine Setup on the Control Panel.
2 Select Admin Setting. Login message pops up, then enter
password and press OK.
3 Press Setup tab > Fax Setup.
4 Press Up/Down arrow to go to the next page.
5.3
<Faxing (Optional)>