Copying Originals; Changing The Settings For Each Copy - Samsung SCX-6345N User Manual

Copying originals

This process is the normal and usual way to copy your originals.
1 Press Copy from the main screen.
2 Place originals face up into the DADF. Or you can use the scanner
glass with a single original document face down.
3 Adjust the settings for each copy such as Original Size, Reduce/
Enlarge, Duplex and so on. (Page 4.2)
4 Select the tray by pressing the appropriate tray on screen.
5 Enter the number of copies using the number keypad, if necessary.
6 Press Start on the control panel to begin copying.
Note
To cancel the current copy job, press Stop/Clear on the control
panel.

Changing the settings for each copy

On Basic tab of Copy screen, user can select copy features before the
start of copy.
Note
The setting of on Basic tab is only for each copy, it means that
the setting does not apply for the next copy job. After finishing
the current copy job, the machine automatically resumes to the
default settings. (Page 4.7)
Changing the size of originals
Press Basic tab > Original Size, then use Right/Left arrows to set the
original size.
Press more to see the detail values.
• Custom: select the scanning region of the original. Press the
cardinal point arrows to set the size.
• Auto: the machine automatically detects and adjusts the size of
originals.
• Other preset values: provides user to select commonly used
values easily.
Reducing or enlarging the copy
Press Basic tab > Reduce/Enlarge, then use Right/Left arrows to reduce
or enlarge an image on the paper. Press more to see the detail values.
• Original(100%): prints texts or images as the same size as
originals.
• Auto Fit: reduces or enlarges an image of originals based on the
size of the output paper.
• Other preset values: provides user to select commonly used
values easily.
4.2
<Copying>