Using Special Copy Features - Samsung SCX-6345N User Manual

• Text/Photo: Use for originals with mixed text and photographs.
• Photo: Use when the originals are photographs.
Changing the darkness
There are 5 levels of darkness. Use Right/Left arrows to change the
darkness of the output.

Using special copy features

On Advanced tab or Image tab of Copy screen, you can select copy
features in depth.
ID card copying
The machine prints one side of the original on the upper half of the paper
and the other side on the lower half without reducing the size of the
original. This feature is helpful for copying a small-sized item, such as a
name card.
1 Place a single original face down on the scanner glass. (Page 3.1)
2 Press Copy from Main screen.
3 Press Advanced tab > ID Copy.
4 Press Start on the control panel
Then the machine starts scanning the front side.
5 Place back side of original and press Start on the control panel to
begin copying.
Note
If the original is larger than the printable area, some portions
may not be printed.
2-up or 4-up copying (N-Up)
The machine reduces the size of original images and prints 2 or 4 page
onto one sheet of paper.
1 Load originals face up in the DADF. (Page 3.1)
Note
Originals must be loaded in DADF to use this feature.
2 Press Copy from Main screen.
3 Press Advanced tab > N-Up.
4 Select Off, 2Up, or 4Up.
• Off: copies an original onto one sheet of paper.
• 2Up: copies two separate originals onto one sheet of paper.
• 4Up: copies four separate originals onto one sheet of paper.
5 Press Start on the control panel.
Note
You can not adjust the copy size using the Reduce/Enlarge for
using N-Up feature.
Poster copying
Your original is divided into 9 portions. You can paste the printed pages
together to make one poster-sized document. This copy feature is
available only when you place originals on the scanner glass. Each
portion is scanned and printed on by one in the following order.
1 Place a single original face down on the scanner glass. (Page 3.1)
2 Press Copy from Main screen.
3 Press Advanced tab > Poster Copy.
4.4
<Copying>