Changing The Settings For Each Scan Job - Samsung SCX-6345N User Manual

administrator made through the authorized user setup. For details,
see page x.x.
7 Press OK.
If you set My Login Name, enter the Login ID and password and
then press OK.
8 Enter the recipient's email address and press OK.
If you have set up Address Book, you can use a one-touch dial
numbers or a speed email or group email number to retrieve an
address from memory. See page 6.7.
9 To enter additional addresses, press OK when Yes appears and
repeat step 9.
To continue to the next step, press the Scroll buttons to select No
and press OK.
10 If the display asks if you want to send the email to your account,
press the Scroll buttons to select Yes or No and press OK.
Note
This prompt does not appear if you have activated the
Send To Self option in the email account setup.
11 Enter an email subject and press OK.
12 Press the Scroll buttons until the file format you want appears and
press OK or Start.
The machine begins scanning and then sends the email.
13 If the machine asks if you want to log off your account, press the
Scroll buttons to select Yes or No and press OK.
14 Press Stop/Clear to return to Standby mode.
Scanning to an FTP server
You can scan an image and then upload it to an FTP server. You need to
set up parameters for access to FTP servers from SyncThru™ Web
Service. See page 6.4.
Before scanning, you can set the scan options for your scan job. See
page 6.6.
1 Make sure that your machine is connected to a network.
2 Load originals face up into the DADF or place a single original on
the scanner glass.
For details about loading an original, see page 3.1.
3 Press Scan/Email.
4 Press the Scroll buttons until Scan to FTP appears on the bottom
line of the display and press OK.
5 Enter the user ID and press OK.
6 Enter the password and press OK.
7 Press the Scroll buttons until the FTP server you want appears and
press OK or Start.
8 Press the Scroll buttons until the file type you want appears and
press OK or Start.
The machine begins scanning and then sends the file to the
specified server.
Scanning to an SMB server
You can scan an image and then send it to an SMB server. You need to
set up parameters for access to SMB servers from SyncThru™ Web
Service. See page 6.4.
Before scanning, you can set the scan options for your scan job. See
page 6.6.
1 Make sure that your machine is connected to a network.
2 Load originals face up into the DADF or place a single original on
the scanner glass.
For details about loading an original, see page 3.1.
3 Press Scan/Email.
4 Press the Scroll buttons until Scan to SMB appears on the bottom
line of the display and press OK.
5 Enter the user ID and press OK.
6 Enter the password and press OK.
7 Press the Scroll buttons until the SMB server you want appears and
press OK or Start.
8 Press the Scroll buttons until the file format you want appears and
press OK or Start.
The machine begins scanning and then sends the file to the
specified server.

Changing the settings for each scan job

Your machine provides you with the following setting options to allow you
to customize your scan jobs.
• Scan Size: Sets the image size.
• Original Type: Sets the original document's type.
• Resolution: Sets the image resolution.
• Scan Color: Sets the color mode.
• Scan Format: Sets the file format in which the image is to be saved. If
you select TIFF or PDF, you can select to scan multiple pages.
Depending on the selected scan type, this option may not appear.
To customize the settings before starting a scan job:
1 Press Scan/Email.
6.6
<Scanning>