iHome HiP50 User Manual page 14

Symptom
Sound is distorted Volume level is set too high
Sound source is distorted
Unit/adaptor gets This is normal
warm after extended
play at high volume
Alarm not working AM/PM time/alarm time not set correctly
Bluetooth music is Bluetooth device is out of range of unit
broken up
Can't play Bluetooth Device does not support the A2DP and
music from cellphone AVRCP Bluetooth profiles
or other Bluetooth
devices
Device and unit are not paired AND linked
Can't hear caller's Bluetooth device is out of range of unit
voice
Volume on unit is too low
Others can't hear You are too far from unit microphone
my voice/voice isn't
clear to listener
Clock reset/changed Electrostatic charge from line-in cord
times
Note: When not in use, attached line-in cord plug must be stored in plug holder on rear of
unit to avoid improper operation.
Troubleshooting
Possible Problem Solution
Decrease the volume
If the iPhone/iPod original sound source (MP3) is old or of poor quality,
distortion and noise are easily noticed with high-power speakers. Try a
different file from a trusted source such as iTunes.
If you are using an external sound source like older generation of iPod
or iPod Shuffle, try reducing the output volume on the device itself. Also
try turning bass boost OFF.
Turn unit off for awhile or lower volume
When setting clock or alarm time, take note of the AM/PM indicators
Move your Bluetooth device within 30 feet of the unit
While you need the A2DP and AVRCP Bluetooth profiles to stream
music to the unit, you can still use the handsfree speaker phone
functionality
Make sure your phone supports the A2DP and AVRCP Bluetooth
profiles before linking/pairing. The unit defaults to the last linked
device, so a new device may need to be linked from the device
itself (see your device's user guide).
Move your cell phone closer to unit
Raise volume on unit
The mic is near the Talk Button. Move closer to the unit.
Store the end of the line-in cord properly away in provided plug holder
on back of unit when not in use. Adjust clock to proper time.
11
P14