Radio Bridge RBM101 User Manual page 25

001f Write to flash failed An attempted write to flash failed
0020 Radio receive
config failed
0021 Radio transmit data
load failed
0022 Radio transmit start
failed
0023 Serial transmit
overflow
0024 Bootloader failed
0025 Invalid baud rate
0026 Duplicate buffer
full
0027 Governor blocking
C © 2017, R
OPYRIGHT ADIO
The configuration of the radio receiver failed
Loading data into the transmit buffer on the radio failed
Starting the transmit operation on the radio failed
The serial port had a transmit overflow condition and
thus data has likely been lost from the module back to
the host.
The initialization of the bootloader has failed and
bootloader cannot run
The baud rate setting is invalid, baud rate is unchanged
The buffer that tracks duplicate packets had an overflow
condition.
The governor has engaged and has blocked this message
from transmission
B I .
RIDGE NC
R B
ADIO RIDGE
R B RBM101 U
ADIO RIDGE
RBM101 U G
SER UIDE
G P 24 35
SER UIDE AGE OF