Security - Siemens SP65 User Manual

Hide thumbs Also See for SP65:
Table of Contents

Advertisement

of SP65 FUG am, A31008-H7450-A40-1-4A19 (15.02.2005, 15:46)
left page (97)

Security

Settings
¢
C
¢
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Additional information
The keypad can also be directly locked and
unlocked in standby mode.
In each case:
#
Direct call
(Phone-code protected)
Only
one
dialled (see also page 34).
¢
Security
T
Select function.
Press and hold.
phone number can be
Only
(PIN2 or phone-code protected)
Dialling options are restricted to
SIM-protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialling.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
PIN code
For description, see page 24:
PIN
control,
Change
PIN,
Chg.phonecode
This SIM only
(Phone-code protected)
The phone can be connected to a
SIM card once the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Settings
97
b
Change
PIN2,
b

Advertisement

Table of Contents
loading

Table of Contents