Siemens SP65 User Manual page 100

of SP65 FUG am, A31008-H7450-A40-1-4A19 (15.02.2005, 15:46)
left page (100)
100 Settings
Your service provider is displayed:
§List§
Create/change entry:
<Empty>
Record new service provider
(last entry in the list):
Furth.network
Select, enter the provider data and
save it.
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred
network is inadequate when you switch on
the phone, the phone may register in
a different network. This can change when
the telephone is next switched on or if
another network is selected manually.
Band selection
Select either GSM 900,
GSM 1800 or GSM 1900.
Fast search
When this function is active,
network reconnection is speeded
up (standby time is reduced).
Display list of preferred
networks.
or select an existing entry,
then select a new service
provider in the list and
confirm.
User group
Depending on the service provider,
you can create groups with this
service. These can have access to
internal (company) information, for
example, or special rates apply.
Please check with your service
provider for details.
Active
Activate/deactivate function.
"User group" must be deactivated
for normal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
All outgoing
In addition to network control for
a user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
b
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network
configuration).
b