Table of Contents
Advertisement
of SP65 FUG am, A31008-H7450-A40-1-4A19 (15.02.2005, 15:46)
left page (95)
Setting a profile
I
§Options§
§Edit§
I
§Edit§
HTTP profile
The phone default setting varies
from service provider to service
provider:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will also find
the current settings for the service
provider on the Internet at
www.siemens.com/
mobilephonescustomercare
in the FAQ section.
I
Select the profile.
Open menu.
Open the selection.
Select
settings, and/
CSD
or
GPRS
settings.
Make the settings as spec-
ified by your service
provider.
Make the settings.
Authentication
Activate or deactivate encrypted
dial-up (CSD connections only) for
Internet access.
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be
enabled by the service provider.
There are variations in fax and data
reception, depending on the net-
work. Please ask your service pro-
vider about this.
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec voice/fax
(Only if no special fax or data number
is available)
Start the required communication
program on your PC and activate the
function on the phone during the call
(the PC will take over the
connection).
Settings
95
b
b
Advertisement
Table of Contents
