Expanded programs
Options
Save as User Program
Recall measurement
data
Instrument Setup mode
98
Table 12 Options for Single Wavelength(Continued)
Description
To store the selected parameters as a User Program, refer to
Recall saved measurement data, wavelength scans or time courses, refer to
page
43.
Basic data of the instrument, refer to
Concentration Factor:
1. Press Concentration Factor: Off in the "Options" menu.
2. Press On to highlight this feature.
3. Press Factor and enter the factor.
4. Press Unit and select the corresponding units for
5. Press OK to confirm.
Concentration Resolution:
1. Press Concentration Resolution in the "Options" menu.
2. Select the resolution.
3. Press OK to confirm.
4. Next press Return to return to the results screen.
section 5.2, page
27.
concentration from the displayed list.
section 6.1, page
73.
section 5.3,