Troubleshooting - Orbit Research Orbit Reader 20 User Manual

12. Do not unplug the cable. Wait for the message "Device upgrade has
been completed" on the upgrade utility or until the Orbit Reader reboots and
shuts down.
13. The Orbit Reader is upgraded. Turn on to start using the device.
To check for successful upgrade of the device, press Space to open the Orbit
Reader Menu and arrow to "Version" in the list. The version number of the
firmware release should match the number on the display.

Troubleshooting

If the upgrade utility shows the error message below, please download C++
Redistributable and install on the PC.