Orbit Research Orbit Reader 20 User Manual page 16

Rename a file
or folder
Cut a file
Copy a file
Paste a file
Mark a file
Protect or
unprotect a
file
Edit the
current file
5) deleted.
The Rename File command allows you to
change the name of a file or folder. To use it,
Space + R
press the Rename command. Orbit Reader
(dots 1 2
responds with an Edit Box containing the
3 5)
original file or folder name. Edit the name or
type a new one and press dot 8.
Space + X This action cuts the currently selected file(s)
(dots 1 3 from their location and places it(them) on the
4 6) clipboard to be used with the paste command.
The Copy File command makes a copy of the
Space + C currently selected file(s) and places it(them)
(dots 1 4) on the clipboard to be used with the paste
command.
This action pastes the file(s) or folder(s) that
Space + V
are currently on the clipboard into the current
(dots 1 2
location in the File Manager. If no file or folder
3 6)
is on the clipboard, no action is taken.
When moving multiple files, use the Mark File
command to mark each individual file before
Space + M using Cut, Copy, or Delete. To Mark a file,
(dots 1 3 arrow to it and press Space + M.
4) To clear a marked file, press Space + M again.
File Manager indicates marked files by raising
dots 7 and 8 of the first letter of the file name.
To protect a file from accidental changes,
arrow to the file and press Space + P. To
Space + P
remove the protected status, select the file and
(dots 1 2
press Space + P again. To determine if a file is
3 4)
Protected, arrow Right or Left to the Protected
heading.
When editing the current file, the Orbit Reader
switches to an Edit mode, which is indicated by
Space + E a cursor at the point of input. The cursor is at
(dots 1 5) the first character shown on the display when
you pressed the edit command. As you type,
everything is saved to the file.