Orbit Research Orbit Reader 20 User Manual page 39

NVDA Commands
Function
Scroll braille display back
Scroll braille display forward
Move braille display to previous line Space + dot 1
Move braille display to next line
For displays that have a joystick:
Function
Up Arrow key
Down Arrow key down
Left Arrow key
Right Arrow key
Enter key
JAWS
If you use the JAWS screen reader and it is already installed, the Orbit
Reader setup program installs drivers to make the braille display and JAWS
work together. If you have not already installed JAWS, install it first, then
run the Orbit Reader setup program.
Start JAWS, and open its main screen. For JAWS versions 11 or later, select
the Braille item in the Options menu. Select Orbit Reader 20 from the braille
display list.
JAWS turns on braille output when you configure it for the display. To turn
off braille support, select No Display from the Options/Braille menu.
Note: For a longer description of any of the following commands, turn JAWS
keyboard Help on by pressing Insert + 1 and type the command. Quickly
type the command twice to get an even longer description. Press Insert + 1
again to exit JAWS keyboard Help mode.
Key
up
left
right
select
Keys
Space + dot 2
Space + dot 5
Space + dot 3