Orbit Research Orbit Reader 20 User Manual page 44

Adjust JAWS options
JAWS window
Run JAWS Manager
List of links on page
Show current time
Show script file name
Quit JAWS
Function
Ctrl + A - Ctrl + Z
F1 - F10
Ctrl + F1 - Ctrl + F10 dot 8 + Computer Braille number 1 - 0
System Access
To connect Orbit Reader 20 to System Access, the device must be connected
by a Standard-A to Micro-B USB cable and set in HID protocol mode.
1. Press Space to open menu.
2. Arrow Down to the USB selection.
3. Arrow Right or Left to select HID.
4. Press select.
5. Press dot 7 to return to the last location.
Another way to quickly switch to HID mode is to use the short cut keys
Space + dots 2 7.
After running System Access in HID mode, connect the USB cable and wait
up to 30 seconds. System Access announces when Orbit Reader 20 is
connected.
Window-Eyes
To connect to Window-Eyes using USB, the Orbit Reader USB protocol must
be set to Serial. To set it to Serial, press Space to open the menu and arrow
Jaws Special Key Commands
dot 8 + any letter
dot 7 + Computer Braille number 1 - 0 (0 = F10)
Select + dots 1 2 3 6
Space + J
Space + dots 2 3 7 8
Space + dots 2 3 5 6 7 8
Space + dots 2 3 4 5 7 8
Select + dots 1 2 3 4 5
Space + dots 2 5 6 7 8
Keys