Orbit Research Orbit Reader 20 User Manual page 20

shows a list of the files on the SD card. Press Select or dot 8 to open a file or
folder. If there is no SD card inserted, "No SD card" is displayed.
When you reach the end of a file, "End of file" is displayed by the Reader.
Similarly, if you are at the beginning of the file, "Start of file" is displayed.
Reader Commands
While in Stand Alone mode, the following commands are available.
To...
Go to Previous
or Next display
Go to Previous
or Next
Character
Go to Previous
or Next Word
Go to Previous
or Next
Paragraph
Go to Start of
paragraph
Go to End of the
Paragraph
Go to Previous
Press
use the
See
Panning
information.
buttons
If the user presses Right Arrow, the next
letter appears on the right side of the
press Left
display.
or Right
To conform to traditional braille display
Arrows
navigation commands, the Reader also
supports Space + dot 3 and Space + dot 6.
press If the user presses Space + Right Arrow,
Space + the next word appears on the right side of
Left or the display.
Right The Reader also supports Space + dot 2 or
Arrows 5.
Pressing the Previous or Next Paragraph
press Up or
command moves to the previous or next
Down
carriage return in the file.
Arrows
Also works with Space + dot 1 or 4.
Space + To place your cursor at the start of a
dot 7 + paragraph, press the Space + dot 7 + Left
Left Arrow Arrow.
Space +
To place your cursor at the end of a
dot 7 +
paragraph, press the Space + dot 7 + Right
Right
Arrow.
Arrow
press dot 3 Pressing dot 3 or dot 6 moves back or
Here's why and/or additional
information
Panning Keys section for more